In Stock
1. The mechanism adopts optical axis module and high-precision ball screw, which is driven by a stepping motor to reciprocate left and right to ensure accurate reset each time, long life, and easy maintenance or replacement.
2. Run the spray bar to move back and forth left and right to spray, and you can choose a local area to achieve targeted spraying
◇PCB board width: 50-500mm
◇Track length: 600mm
◇Transport height: 965±20mm
◇PCB transport direction: L-R(R-L)
◇PCB transport speed: 0~1500mm
◇Power supply: AC220V1P 50/60Hz
◇Power Consumption: Approx.30W
◇Control mode: board control
◇Working surface (with electrostatic rubber): 400*200mm
◇Dimensions: 600*850*900mm
◇Weight: about 35KG
◇Communication interface: SMEMA adopts two-wire cable
◇Monorail: 1 is the fixed side, 2 is the movable side
1. Reduce the standard precision screw to ensure the
adjustment is narrow and stable;
2. Adopt professional wear-resistant and anti-static flat belt, and
special 2.0 MM thick aluminum profile track to ensure stable.
connection and stable transportation;
3. Standard signal line connected online with other equipment.
4. According to customer requirements, we can produce guide
rail lines with different lengths.
5. The working surface is equipped with anti-static rubber to
better prevent static electricity;
6. The transmission motor adopts two 42*48 stepper motors.
| Weight | 35 kg |
|---|---|
| Dimensions | 60 × 85 × 90 cm |
© 2001 R.Q.S Elettro All Right Reserve
Reviews
There are no reviews yet.