1 Power supply: single-phase AC110-220V 50-60HZ, 250W.

2 knife material: imported SKD-11 material.

3 Cutting speed can be set to high and low: 300/S-500/S can be switched freely.

4 The quasi-segmentation length is up to 400mm, and there are three other maximum strokes: 600mm, 900mm, and 1200mm. It can also be customized beyond these ranges.

5 The gap between the upper and lower knives can be easily adjusted by turning the hand.

6. PCB maximum cutting length: 400mm.

7 PCB maximum thickness: 0.5-3.2mm.

8 Maximum thickness between V-CUT slots: 0.25-1.0mm.

Features:

1. After connecting multiple PCB boards with solder, the breakage will often damage the circuit or damage the electronic parts. Using this machine can avoid damage and improve work efficiency and quality.

2 With this knife-feed separation, the stress can be completely reduced to prevent solder cracking and part breakage.

3. The knife-type splitting machine is an electric PCB board and aluminum substrate splitting machine that uses an upper circular knife and a lower straight blade. When splitting, the PCB is fixed to the lower knife through the V-groove, and the upper knife is controlled by the foot switch to realize the splitting.

4. The moving stroke of the round knife (that is, the length of the split plate) can be preset, and the setting range is any two groups between 0, 100, 200, 300, and 400mm.

5. The operation is safe. There is a protective blade on the round knife, which will not hurt your hands. It can also be equipped with a safety protection sensor device. When human hands or foreign objects enter the working area, the knife will stop

6. Various PCB thicknesses can be fine-tuned to solve the problem of the depth of the V-CUT groove on the PCB.

7 .The circular knife and the lower straight knife are made of imported SKD-11 material, which is hard and wear-resistant, has a long service life, and the stress of the split plate is small to prevent cracking of solder joints. The blade can also be treated with titanium plating, which is more durable.

Features:

◆The hoisting power adopts single-phase gear reduction motor.

◆The lifting drive adopts 30MM hard shaft guide rail, and is equipped with Taiwan TBI ball screw drive.

◆Conveyor track adopts special profile, anti-collision stainless steel channel.

◆The conveyor chain is made of PC40 vinyl.

◆The control adopts Siemens PL_C control, which is operated by lightly touching the button switch.

◆Equipment status indication: Three-color lights with buzzer.

◆The photoelectric sensor adopts OMRON sensor for induction.

◆Anti-splint sensor is installed at the exit to prevent the splint from lifting when the PCB is not fully pushed out.

◆The push plate cylinder uses the motor cylinder to push the PCB into the rack.

◆The shell of the equipment is all sprayed with electrostatic powder, the surface is firm and durable, and the paint will not fall off.

◆Dimensions: (L)600*(W)650*(H)1 195mm

◆Steel frame structure, the frame is bent with 61.5 cold plate, and the surface is powder sprayed with computer white:

◆Transportation adopts Leisai stepping motor

◆The falling action parts are made of aluminum alloy

◆Conveyor belt adopts 7mm flat belt

◆Cylinder+solenoid valve

◆Oil-water separator

◆A set of three-color lights

◆Programmable control card 14 points, 3 Sensors

◆Power supply: AC 220V/50Hz; air pressure: above 0.6 Mpa, power 0.05 kw

◆Dimensions: (L)600*(W)650*(H)1 195mm.

◆Steel frame structure, the frame is bent with 81.5 cold plate, and the surface is powder sprayed with computer white;

◆Transportation adopts stepping motor.

◆The falling action parts are made of aluminum alloy.

◆Conveyor belt adopts 7mm flat belt.

◆Cylinder+solenoid valve.

◆Oil-moisture high device.

◆A set of three-color lights.

◆Mitsubishi programmable control card, 3 Sensors.

◆Power supply: AC 220V/50Hz; Air pressure: above 0.6Mpal Power: 0.05kw.

Equipment features:

◆Strong and stable design.
◆PLC control system.
◆The control panel is LED true color touch screen.
◆With automatic alarm function.
◆Standard equipped with signal, can be connected online with other equipment.
◆FIFO, LIFO, NG/OK and straight-through operation modes.
NG signal optional.
There are board signals, and NG is optional when the NG signal is ON.
There is a board signal, and when the NG signal is OFF, NG can be selected.
The board signal is OK signal, and the NG signal is NG when it is ON, optional.
OK board storage quantity can be set.
OK board storage time can be set.
NG plate storage quantity can be set.
NG plate storage time can be set.