◇描述：本设备用于生产线源头，裸板可使用吸板功能，双面板可使用装板功能，使生产更加方便快捷。 
◇上料时间：约6秒
◇容器更换时间：约30秒
◇电源及电负荷：100-230V AC（用户指定），单相，最大300VA
◇压力及气流量4-6bar，最大30升/分钟
◇传送高度：900+30（或用户指定）
◇传送方向：左→右或右→左
◇PCB厚度：最小0.6mm
◇容器数量：上输送机：1个，下输送机：2个（或用户指定）
◇间隔选择：10mm、20mm、30mm、40mm

• Model :R-BC500.
• PCB board size : 50×50～600x500mm (LxW).
• PCB board transfer height : 965±20mm (foot cup height adjustment).
• Dimension : 600*1050*1000MM (LxWxH).
• PCB board transmission direction: left-right or right-left.
• PCB conveying track : uses special guide rail and imported circular φ3mm belt.
• Transmission motor: 15W speed control motor (1 set).
• Control system : Panasonic PLC.
• Spacing distance: The maximum spacing of each layer is 20MM.
• Store NG plates : 10 PCS.
• Power supply :AC1100V/ 60HZ (independent electric box control).
• Support English Language.
• Frame material :All sheet metal welding, the surface is electrostatic powder sprayed computer gray.
• Standard SMEMA signal : Using standard four-core signal line, it can be directly connected to other equipment for use.

Features:

1. Appearance structure: sheet metal structure and aluminum profile into the frame, the surface is sprayed, and the color is corrugated white.
2. Microcomputer PLC control system, stable and reliable.
3. Touch screen display operation, with automatic fault diagnosis function, convenient man-machine dialogue.
4. Multiple sound and light and touch screen alarm function.
5. Using stepping motor transmission.
6. Good boards can save 10pcs by rising with bad boards.
7. Applicable behind AOI and SPI equipment.
8. Double line numbers distinguish between NG\OK.

•Max sealing length : 800mm
•Stainless Steel
•Double nozzle
•Bigger pump
•Bigger pump
•Pumping rate: 20m¾/h
•Dimensions::900X450X960mm
• Inflation rate: 0.8Mpa
•Sealing size: 800X8mm
•Power: 2KW
• Power supply: 220V/50Hz

R-610L Ordinary version:

Efficiency: 25 s / disc
System: intelligent single chip processor
Voltage: AC110V or AC220V (switching type)
Speed: 3-stage speed regulation
Weight: 10kg
Display screen: 65 * 15mm screen
Dimension: L520 * W480 * H200mm
Power: 50W
Scope of application: package chip components, IC, etc
Function: simple points
Counting range: – 99999 ~ 99999
Support printing function

R-611L Ordinary version with leakage detection:

Efficiency: 25 s / disc
System: intelligent single chip processor
Voltage: AC110V or AC220V (switching type)
Speed: 3-stage speed regulation
Weight: 10kg
Display screen: 65 * 15mm screen
Dimension: L520 * W480 * H200mm
Power: 50W
Scope of application: package chip components, IC, etc
Function: detect leakage and stop
Counting range: – 99999 ~ 99999
Support printing function

Features:

Adjustable speed SMD components counter/pointing machine
1.Easy to operate, fast and accurate preset function.
2.Can preset the number of parts, convenient point material, hair feeding and picking operations designed for SMT material belt parts.
3.Both forward and reverse can count, accurately calculate the quantity, zero error.
4.The inventory speed is adjustable, speed up the inventory efficiency, suitable for different material belt requirements.
5.Can fully control the number of SMT parts in the factory, to avoid inventory and capital backlog.
6.To facilitate the transfer of company personnel flow management, material transfer management.

*Running speed: motor speed 1400RPM secondary rotation 400RPM
*Working power: 220V/230V/ 50HZ
*Rated power: 40W
*Stirring capacity: 0-500g X2 cans (other 1-2kg can be customized)
* Accepting tin cans: $60-$70 standard equipment in the diameter of the tank body,
*Free standard 500G aluminum alloy counterweights for long-term use without rusting
*Time setting: 1s~ 99minute99s
*Display mode: LED digital timing display
*Reminder function: buzzer warning, safety, humanization
*Operation: the main engine runs stably;Low noise; visual scale speed regulation
*Dimensions: 410 X 410X 490mm, inner warehouse depth 180mm
*Net weight : 33Kg

Machine Weight: 10KG
Machine Dimension: L470*W300*H180MM
Power Supply: AC220V/110(50HZ)
Rated power: 25W
Counting Speed: one reel of 08-5 cost around 19s to 2minutes.
Counting range: -99999–99999PCS
Machine Panel: LCD display
Material Pulley diameter: Any SMD pulley size can be used
Tape interval: 2, 4, 8, 10, 12, 16, 24, 32, 44, 56mm cycle setting
Strip width: 8.12.16.24.32.44.56mm
With English control Panel

Features:

Adjustable speed SMD components counter/pointing machine
1.Easv to operate, fast and accurate preset function.
2.Can preset the number of parts, convenient point material, hair feeding and picking operations designed for SMT material belt parts.
3.Both forward and reverse can count, accurately calculate the quantity, zero error.
4. The inventory speed is adjustable, speed up the inventory efficiency, suitable for different material belt requirements.
5.Can fully control the number of SMT parts in the factory, to avoid inventory and capital backlog.
6. To facilitate the transfer of company personnel flow management, material transfer management.

PCB width: Max400mm
Transport height: 900±20mm
PCB transport direction: L-R(R-L)
PCB transport velocity: 0~2000mm
System control: PLC control system
Transmission power: stepping motor and stepping driver
Rotation mode: stepping motor and stepping driver
Power supply :AC220V1P 50/60Hz
Power consumption: Approx.100W
Track length: 600mm
Control mode: PLC+Touch Screen
Weight: Around 100KG
Communication interface adopts double wire cable
Monorail : One is fixed edge, Another is movable edge

Features:

1. The standard precision ball screw is electrically adjusted to ensure smooth and accurate width adjustment;
2. Professional wear-resistant and anti-static flat belt and special aluminum profile guide rail are used to ensure smooth connection and stable transportation;
3. Standard equipped with signal line, which can be connected online with other equipment
4. The connecting platform with different guide rail lengths can be made according to customer requirements
5. The worktable is equipped with anti-static rubber to better prevent static electricity;
6. Two 42 * 48 stepping motors are used as the transmission motor

PCB width: Max400mm
Cycle time : About 15 seconds
Power supply : 220-230V AC (user specified), single-phase Electrical load max. 180 VA
Air pressure: 0.45-0.6Mpa
Air flow up to 30 l/min
Transmission height 900 ± 20mm (or user specified)
Transmission direction left → right or right → left (optional)

Features:

※ The top safety cover can be opened to facilitate the handling of machine hardware during maintenance.
※ Easy to use intelligent touch screen function control interface.
※ Adjustable angle speed to ensure that PCB will not slide.
※ Stable and balanced width adjustment device (manual control screw rod adjustment)
※ Small machine floor area.
※ Compatible SMEMA interface.

◇Display mode: 7 inch true color touch screen
◇Function: Wire, cable, automatic cutting and peeling, with intermediate peeling function
◇Wire type: cable wire, PVC, sheathed wire, multi-core sheathed wire, etc.
◇Stripping range: φ3-16mm (including sheathed wires below 6 cores)
◇Cutting length: 1mm-99999.99mm
◇Cutting tolerance: within 0.002*L (L=cutting length)
◇Motor power: 650W
◇Rated voltage: AC220V/50/60HZ
* Multi-segment intermediate stripping, the interval between each segment is different, any length of
intermediate stripping, up to 100 segments
* Multi-segment intermediate stripping, the interval between each segment is the same, the length of
the intermediate stripping is the same, the number of segments is not limited
◇Middle stripping method: double tool holder marking mode
◇Maximum diameter of conduit: φ16
◇Tool material: high-quality imported high-speed steel
◇Productivity (times/hour): 1000-1500 medium strips/hour , according to the length and size of the cable
◇Drive mode: 8-wheel drive (full motor drive mode)
◇Wire feeding method: belt feeding, no embossing and scratches on the cable
◇Weight: 73KG
◇Dimensions: 620*630*430mm
◇Remarks: special cables, special requirements can be customized, need to send sample lines for
testing

Dimensions: L950×W290×H450mm
Cutting method: circular knife walking cutting
Transmission mode: gear assembly
Drive mode: motor + synchronous belt
Cutting range: L770*W60mm
Cutting range: L745*W25mm
Equipment weight: 40KG
Cutting speed: 10m/min
Power source: AC220V, 50~60HZ
Material box induction: photoelectric induction

Features:

1) Microcomputer intelligent control, cutting time and length can be set. One-button start/stop, easy to operate.
2) Limit switches are installed at both ends of the shearing stroke of the equipment, and the whole machine will be powered off if the stroke is exceeded.
3) A safety sensor is installed at the waste recycling place. When the material box is removed, the equipment will automatically stop working to prevent employees from extending their hands from the bottom of the equipment into the working area of the equipment and knives to ensure safety. At the same time, ensure that all the cut materials fall into the recycling box.
4) This machine has a one-year warranty and permanent after-sales service
5). This tape cutting machine is suitable for all kinds of SMT tapes. It can easily cut from 0.05mm to 1.5mm thick tape.
6). Patent (Patent No. ZL201520023125.6) The equipment is elegant in appearance, occupies a small area, and is convenient to use and store. specific
The size can be customized according to the recycling area of the customer’s various placement machines.
7). Blade: The material is imported DC-53, and it is guaranteed to be used for one year without sharpening.
8). Patent (Patent No. ZL201530007763.4) tooth knife rolling cutting mechanism, when cutting, it relies on eight springs at the bottom of the tooth knife
The tension makes the cutting edge plane of the gear knife and the straight knife point contact tangent, which solves the problem of fast wear of the upper and lower straight knife blades on the market.
Disadvantages, all our belt cutters are guaranteed for two years (including the blade), the four sides of the straight knife can be turned over for use, and the toothed knife can be ground repeatedly. same
At the same time, it completely solves the phenomenon that the traditional tape cutting machine uses a small blade to cut back and forth and encounters the frequent jamming of the material tape. As shown below: